Clock-Cutting the Fretwork

More on the "last hole". 

Reaching the corner, cut another relief hole and cut to the tip of the other point.  Notice we are stopping at the tip again so we can more easily start the cut down the second side of the point.
	After the relief is cut, finish down the side of the second point.
Cut a relief hole at the corner.
	After turning the blank, cut around the circle...
...finishing the hole.

Although there are a couple of simple holes left, we'll end our commentary on the crest here.

Page 12   Page 14

• Cottage Clock
  • Introduction
  • Cutting the blank for the crest
  • Cutting a teardrop hole
  • Cutting a spiral hole (Part 1) (Part 2) (Part 3)
  • A hole with points (Part 1) (Part 2) (Part 3)
  • Small triangular holes (Part 1) (Part 2)
  • Last hole in the crest (Part 1) (Part 2)
  • A more complex hole (Part 1) (Part 2)
  • Cutting the crest's outside (Part 1) (Part 2) (Part 3) (Part 4)

To Tuliptree Crafts

To tulip-tree.com.